- Origin: Mainland China
- Maximum Current: 80A
- Certification: CE,FCC,RoHS
- Application: Solar System Controller
Rated Charge Current |
10A |
20A |
30A |
40A |
50A |
60A |
80A |
Rated Voltage |
12V/24V/36V/48V |
||||||
System voltage |
100V |
||||||
Maximum PV open circuit voltage |
≤30mA |
||||||
Loop voltage drop |
≤0.3V |
||||||
Battery type |
Flooded,AGM,GEL,LifePO4,Lithium |
||||||
USB Output |
5V/2A×4 |
||||||
temperature compensation |
-4mV/℃/2V(25℃) |
||||||
Working temperature range |
-20℃~+50℃ |
||||||
Protection category |
IP32 |
||||||
Humidity |
95%,no-condensing |
||||||
Terminals |
8AWG/10m㎡ |
8AWG/16m㎡ |
4AWG/25m㎡ |
||||
Mounting hole size |
158×68mm -6mm |
190×69mm -5mm |
190×104mm- 5mm |
||||
Product size |
168×88×36mm |
200×106×47mm |
200×131.6×62mm |
||||
Weight |
0.22Kg |
0.4Kg |
0.73Kg |
0.79Kg |
The series controller is a PWM charge controller with LCD display using the most advanced digital technology. Multiple load control modes make it widely used in solar off-grid system, traffic signal, solar street light and other fields.
-
Most parameters displayed explicitly.
-
Auto-detect battery voltage or maintain a fixed voltage
-
All working parameters can be reset, saved and transferred to a computer or other terminal equipment.
-
Various control mode for load
-
Besides regular input,output and battery protection, protection of over-current from solar panel is applied.
-
PWM solar controller, Intelligent controller able to choose 12V/24V/36V/48V Lead-acid battery (Sealed, Gel, Flooded) and Lithium battery (LiCoMnNiO2, LiFePO4)
-
before the first installation, please make sure your battery has enough voltage for the controller to recognize the battery type.
-
The charge regulator is only suitable for regulating solar modules. Never connect other charging power sources to the charging regulator.
-
Multiple load control modes: 24Hours Working Control, Light Control, Light and Dual Time Control
-
Controller Automatic temperature compensation and Full protection, like Reverse-Polarity, Battery Reverse, Over-Heating,Over-Current, Over-Load, Low-Voltage Lightning Protection.
-
4 stages PWM charging: Bulk, Absorption, Equalize, Float;
-
Double USB output 5V/2A and LCD display with Back-lighting shows device’s operating data and working condition
How to connect our controller?
⭐1. Connect the battery to the controller. It is recommended to add an air switch between the controller and the battery to protect the controller and battery. When the controller is connected to the battery, the LCD screen will display the parameters and then set the battery type.
⭐2. If DC output is required to control the load, please set the output control mode first, and then turn on the DC output cut-off switch.
⭐3. Connect the solar panel PV to the controller, provided that the PV input voltage is within the charging working range at the controller end, the controller will enter the charging state.
⭐4. It is recommended that the controller add an air switch on the battery, solar panel and load for protection.
⭐5。Disconnect in reverse order of wiring
Troubleshooting.
Error Code: Cause of Failure: Solution
E01: Battery undervoltage protection : Charge the battery
E02: Overload protection: Check the wiring of the load or reduce the load appliance
E03: Load break protection: Check the wiring of the load or reduce the load appliance
E04: Load overvoltage protection: Check the load wiring or reduce the load appliance
E05: Solar panel overcurrent protection: Check the solar panel power or reduce the number of panels
Attention.
If you need the instruction manual, please contact us
There are no reviews yet.