MG-PP Sretch Blow Moulding Machine
Brief Introduction
MG-PP stretch blow moulding machine is specially designed for hospital and dairy product package because the purity of the blowing air is the most outstanding point of the machine. The “STATIC DUST-REMOVING SYSTEM” removes tiny dust from performs in the course of automatic conveyor sending preforms. Long preform baking tunnel meets requirements of “GRADUAL HEATING” to have heating quality of performs. MG-PP overcomes many technical constrains and perfects its function of purifying the blowing air ideally, and now it has already become an ideal equipment for hospital liquid medicine package and most popular container for dairy products without pollution.
Overview
* Control system
The control system is the key of MG-PP
Stretch blow moulding machine. Together with
HITECH Man-Machine Interaction (MMI) control
panel with user-friendly, the whole control
system presents super performance with
precise control, convenient parameter setup,
obvious display and reasonable memory.
* Pneumatic system
Pneumatic system provides the power for
MG-PP’s movement. World famous high quality
pneumatic components are equipped on MG-PP
2000 such as Festo from Germany. High
precise action, long service life and
reliable performance are their highlights.
Those pneumatic components suppliers’ global
service network provides customer their
prompt after-sale service locally for their
pneumatic products used on MG-PP 2000.
* Sensor system
MG-PP adopts high quality imported sensor
& switch system including proximity
switch, photoelectric switch, electronic
magnet switch to keep production process
going step by step and avoid possible damage
on machine.
* Heating system
In consideration of PP property, MG-PP
stretch blow moulding machine adopts
specially designed long baking tunnel and
infrared type heating mode, whose superior
thermal-radiation and thermal penetrability
provide machine with powerful heating to
meet strict preform heating requirement
under speedy moving. Infrared heating lamps
placed onto three heating zone with sets of
independent voltage adjusting module and
advanced microcomputer controller, can offer
ideal heating for preform of different size.
The horizontal position of each lamp’s is
adjustable to keep the machine flexible.
* Clamping system
MG-PP adopts three-plate type toggle
clamping unit to provide powerful clamping
force. Apart from the three-plate type
toggle clamping unit, there is a high
pressure assistant clamping device that is
special designed to get a firm clamping.
* Preform feeding & bottle discharging
system
MG-PP 2000 automatic stretch blow molding machine is
equipped with automatic prefrom loading system, which
protect the neck of the perform from possible damages. The
heated preforms are blown with neck up so as to ensure the
quality of the finished bottle, and then shaped bottles will
automatic fall down during the machine’ movement.
Features
1.Feeding system carries the preform automatically.
2.Static dust-removing system remove tiny dust in
performs.
3.Suit to produce 0.05 ~ 1.5L narrow neck PP container
4.Advanced PLC control system with a use-friendly control
panel 5.Reliable sensor system monitor machine’s auto
running
6.Equipped with special designed air storage unit
7.Powerful heating unit with precision control and specially
designed preform long baking tunnel.
8.Cooling system to get perfect cooling result
9.Compact structure to save space
10.No need any human labor during bottle production
11.Prevent bottle from possible pollution by worker
12.All of main parts are made of stainless steel.
13.Simple installation & startup adjustment
14.Waste rate of finished bottle is less than 0.3%
Container/Bottle Samples Follows are some IV Bottles produced by MG-PP.
Specification
| General Information | MG-PP 8 | MG-PP 10 |
|---|---|---|
| Materia | PP | PP |
| Clamping Force | 600KN | 750KN |
| Clamping Stroke | 130MM | 130MM |
| Max. Stretching Stroke | 370MM | 370MM |
| Bottom Moving Stroke | 50MM | 50MM |
| Number of Cavities | 8 | 10 |
| Theoretical Output | 8000P/H | 10000P/H |
| Max.area of mouldbase | 0.4M2 | 0.4M2 |
| Max. Mould Thickness | 260MM | 260MM |
| Max.area of mouldbase | / | / |
| Electrical System | ||
|---|---|---|
| Voltage Standard | 380V50HZ | 380V50HZ |
| Number of Heating Zone | 180KW | 224KW |
| Total Power (Full Loaded) | 200KW | 245KW |
| Container | ||
|---|---|---|
| MaxIengthofpreform | 93MM | 93MM |
| Diameterofpreform | 26MM | 26MM |
| Max. Container Volume | 500ML | 500ML |
| Neck Diameter Range | 19MM | 19MM |
| Max. Container Diameter | 80MM | 80MM |
| Max. Container Height | 205MM | 205MM |
| Air system | ||
|---|---|---|
| Recommended Low air pressure | 0.8-0.95MPa | 0.8-0.95MPa |
| Recommened High Air pressure | 1.5-2.5MPa | 1.5-2.5MPa |
| Dimension & Weight | ||
|---|---|---|
| Blow molding machine | 11400X2100X1900mm | 11400X2100X1900mm |
| Preform Autoloader | 2200X1800X2500mm | 2200X1800X2500mm |
| Net Weight | / | / |
Ywashun machinery, the Professional PP stretch blow moulding machine supplier in China.
Note: PP stretch blow molding machine is also known as pharmaceutical stretch blow molding machines for IV bottles, Stretch blow molding machines for BOPP bottles and PP blow molding machine.